During steering gear test should be moved through its full travel in both directions.A.pum
During steering gear test should be moved through its full travel in both directions.
A.pump
B.the cylinder
C.the hunting gear
D.the rudder
During steering gear test should be moved through its full travel in both directions.
A.pump
B.the cylinder
C.the hunting gear
D.the rudder
A.the main propulsion plant
B.lifesaving jackets
C.lifeboat engine
D.state of emergency generator
A.ensure all machinery which may be used during maneuvering is in ready
B.ensure an adequate reserve of power is available for steering gear and other requirements
C.keep the main propulsion unit controls continuously attended when in the manual mode of operation
D.ensure all machinery which may be used during maneuvering is running stably
Auxiliary machinery covers the steering gear, the turning gear, deck cranes,() and others.
A.main bearings
B.main shafts
C.cargo winches
After the order\
A.the gearbox
B.the steering gear
C.the turning gear
A.It is required that all ships are provided with two independent steering gear systems that is one main and one auxiliary
B.The auxiliary gear could be power operated in passenger ships
C.The auxiliary gear must be of adequate strength and sufficient to steer a ship at navigable speed
D.All moving parts of the steering gear must be guarded against any possible damage
In an elector-hydraulic steering system, rudder shock is limited by .
A.a differential gear
B.return springs
C.a hydraulic accumulator
D.relief valves
The control rod of a steering gear pump is attached at its outer end to _____.
A.the hunting gear
B.the rudder stock
C.the rudder controller
D.the feedback unit
A.Only one pump should be used at any time
B.The ship speed should be reduced to 70% of the normal
C.Watch keeping of the steering gear should be increased
D.Limitations of the steering gear should be logged but the bridge need not be informed
When the steering wheel is turned, oil is directed to the steering gear rams by .
A.modulating the oil flow with the six-way valve
B.moving the automatic pressure differential valve
C.moving the receiving telemotor which regulates the tow-way valve
D.varying the eccentricity of a floating ting or angle of a tilting box
A. the bridge
B. the steering gear
C. the rudder
D. a signal from the bridge
为了保护您的账号安全,请在“简答题”公众号进行验证,点击“官网服务”-“账号验证”后输入验证码“”完成验证,验证成功后方可继续查看答案!